17
EN
1
2
3
CLEANING AND CARE
REMOVING THE TOILET SEAT AND LID
1. Open the seat and lid.
2. Pull the seat and lid vertically upwards out of the fixture at an angle of 90°.
FITTING THE TOILET SEAT AND LID
Insert the toilet seat and lid vertically from above.
1. First push the left-hand bolt of the seat into the hinge.
2. Press and hold the right-hand bolt of the seat.
3. Push the toilet seat and lid down until they click into place in the hinge.
CLEANING HINGES
To ensure your shower toilet functions perfectly, the fixture (bolts and hinges) must
be cleaned regularly.
1. Remove the toilet seat and lid as per the instructions.
2. Clean the hinges of the rear cover with a damp cloth (cotton, not microfibre), then dry.
3. Clean the bolts of the toilet seat and lid with a damp cloth (cotton, not microfibre), then dry.
To Next Page
Loading...
