18
EN
MALFUNCTIONS DURING OPERATION
ELECTRICAL SHOCK! FATAL DANGER!
Never open the unit in order to repair it yourself. Never modify the device or add an any additional modules.
The AXENT shower toilet carries live parts and opening it exposes those present to fatal danger!
Warranty and liability claims as a result of wrong handling are specifically excluded.
Malfunction Cause Fault clearance
No Function The unit is in stand-by-mode Slightly knock the rear cover (left)
Main plug is not connected Connect the main plug
Defective fuse on electrical
distributor
Replace fuse on electrical distributor
Fuse in internal mains connection is
defective
Disconnect the main plug and contact customer
service
Power supply is interrupted Have the power supply checked by a skilled person
No water spray
(5 times «beep»)
No water supply Ensure the water supply is released
Basket filter is clogged or
blocked with lime-scale
Contact customer service
Shower temperature too low Shower temperature is set too low Increase shower temperature
Shower spray is too weak
or no water is spraying out
at all
Spray intensity is set too low Increase spray intensity
Spray nozzle clogged or
blocked with lime-scale
Run descaling program
Spray arm does not move
out
Power supply is interrupted Restore the power supply
No water supply Ensure that the water supply is released
Remote control doesn’t work Batteries are empty Replace batteries
To Next Page
Loading...
