Need help?Do you have a question about the Axess-tel AX54 Series and is the answer not in the manual?
General| Model | AX54 Series |
|---|---|
| Manufacturer | Axess-tel |
| Type | Security System |
| Communication Interface | Wired |
| Input Voltage | 12V DC |
| Max Current Consumption | 30mA |
| Operating Voltage | 9-16VDC |
| Power Supply | 9-16VDC |
Lists all items included in the AX54 system package.
Describes the physical placement and visibility of the main unit.
Explains the meaning of the 9 LEDs indicating device status.
Instructions for installing the UIM card and the 9V battery into the main unit.
Step-by-step instructions for installing batteries into the motion sensor.
Guide on how to connect the power adapter to the device.
Guidance on optimal placement locations for the main unit and motion sensors.
Instructions for unlocking the UIM card and entering commands.
Steps for activating/deactivating, changing PIN, and using PUK codes for the UIM card.
Instructions on how to change the default password for the AX54 system.
Procedures for adding and removing motion sensors, including zone configuration.
How to add and delete up to three SMS notification numbers.
Instructions for adding and deleting up to five call notification numbers.
How to configure the delay time for entering the premises after alarm activation.
How to configure the delay time for leaving the premises after arming.
Explains how to arm the AX54 system in different modes.
Describes the Siren Mode for arming the system.
Describes the Silent Mode for arming the system without audible alerts.
How to arm the system to monitor specific zones while allowing movement in others.
Instructions for arming the AX54 system remotely via SMS.
Procedures for disarming the AX54 system normally or under duress.
Method for normal disarming of the AX54 system.
How to disarm the system while alerting emergency contacts.
Instructions for disarming the AX54 system remotely via SMS.
Details technical specifications for the AX54 main unit, including CPU and module.
Technical specifications for the AX54 Motion Sensor (Al100).
States Axesstel's liability limits regarding product use and damages.
Clarifies that the product is not an insurance policy and users should get separate insurance.
Details FCC compliance rules and conditions for operation and interference.
To Next Page