Need help?Do you have a question about the Axial AX10 SCORPION and is the answer not in the manual?
Proper location selection for operating the R/C model to prevent damage or injury.
Essential checks before operating the R/C model for safety and function.
Procedures to follow after operating the R/C model.
Assembling differential case, solid axle, and hubs from Bag A.
Installing linkage sets and mounting the servo and radio/transmission components.
Assembling the transmission, gear set, and drive shafts.
Assembling C hub carriers, shock parts, and shock bodies.
Assembling 3 link connectors and shock caps.
Installing input shafts, gears, and the Scorpion locker from Bag A.
Installing dogbones and final differential parts from Bag A.
Finalizing axle assembly with bearings and ball joints from Bag A.
Assembling hubs and installing screws from Bag B.
Assembling axles, flange pipes, and hubs from Bag B.
Installing bearings and other components from Bag B.
Installing O-rings, springs, and flanged balls into shock absorbers.
Filling shock absorbers with oil and removing air bubbles.
Adjusting shocks for enhanced performance using oil and springs.
General| Brand | Axial |
|---|---|
| Model | AX10 SCORPION |
| Category | Motorized Toy Car |
| Language | English |
To Next Page