axing EoC 2-01 - 1.3. Connectors and LED indicators on the rear panel

2021-06-23 | Technical improvements, changes in design, printing- and other errors reserved. 7
1.3. Connectors and LED indicators on the rear panel
Port Name/Button Type Function
A G.hn F EoC signal
B TV F TV signal (use depends on the application (see 4, page 12)
C
1
R – Reset button
D LAN1/LAN2 RJ-45 Connect to PC or STB or other Ethernet devices
E DC12V DC Connect to the power adapter plug
LED
Status
On
Flashing
Off
1
Link/Act |
Quality
Linked
Receive or transmit
Disconnected or Link fail
2
LAN2 Link/Act
Linked
Receive or transmit
Disconnected or Link fail
3
LAN2 1000
1000
Mbps
N/A
100
Mbps
4
LAN1 Link/Act
Linked
Receive or transmit
Disconnected or Link fail
5
LAN1 1000
1000
Mbps
N/A
100
Mbps
6
PWR
Power supply on
N/A
Power supply off
7
1
WiFi
on
Receive or transmit
WiFi
off
The colour of the LED 1 (Link/Act | Quality) shows the quality of the EoC connection: Green: High
Orange: Medium
Red: Low
1
Reset for EOC 1-32, restore factory settings for EoC 2-32