Need help?Do you have a question about the Axioma QALCOSONIC E 1 and is the answer not in the manual?
Details information displayed on the calculator's front panel.
Describes the manufacturer's adhesive seal-stickers for meter security.
Outlines fundamental requirements for heat meter installation.
Instructions for electrical connections, including sensors and modules.
Various methods for installing the heat meter calculator and flow sensors.
Configuration of jumpers for operational modes and pulse inputs/outputs.
Procedures to check and confirm correct installation and setup.
Steps for applying security seals after the meter is installed.
Explanation of the LCD display elements and symbols used.
Overview of the menu navigation for normal operating mode.
How to access and interpret parameters displayed in the user menu.
Procedures for accessing and viewing data in the service test mode.
Detailed explanation of error codes for calculator, sensors, and flow.
Step-by-step guide to activate the test mode using a jumper.
Methods and interfaces for retrieving data remotely from the meter.
General| Type | Ultrasonic Water Meter |
|---|---|
| MID Approval | Yes |
| Battery Life | Up to 16 years |
| Protection Class | IP68 |
| Measurement Principle | Ultrasonic |
| Communication Interfaces | M-Bus, Wireless M-Bus, LoRaWAN, NB-IoT |
| Accuracy | Class 2 |
| Display | LCD |
| Power Supply | Lithium battery |
| Nominal Diameter | DN15, DN20, DN25, DN32, DN40 |
| Temperature Compensation | Integrated temperature sensor |
| Dimensions | Varies by model |
| Weight | Varies by model |
To Next Page
