Axis 200+ - Page 10

AXIS 200+ Users Manual Section 1: Introduction
9
Operating
Environments
The AXIS 200+
supports TCP/IP and
Internet-related
protocols. It can
therefore be used in
mixed operating system
environments such as
Windows, Macintosh,
UNIX and OS/2.
Using a standard Web
browser, the AXIS 200+
can be configured and
managed directly from
its own web pages.
The AXIS 200+ also supports FTP so that snapshots can be taken and
saved locally.
Dial-up Connection
The Point to Point Protocol (PPP) support allows you to use your
AXIS 200+ remotely over a serial link, just as if it were located on your
local network. By connecting the AXIS 200+ to a modem, snapshot
images can be downloaded to remote computers using standard
modem equipment.
External Device
Connection
The auxiliary input makes it possible to control the AXIS 200+ from
external devices, i.e. IR-sensors, switches, alarm relays etc.
Security
The AXIS 200+ is a self-contained web server. This means that the
camera server is secured like any other Internet host. The Network
Administrator can decide whether individuals, groups, the whole
company or the whole world may access your camera server. Normally
this is done in your company's Internet firewall.