Axis 200+ - Stage 1: Unpacking and Checking the Hardware

AXIS 200+ Users Manual Section 2: Installing the AXIS 200+
11
Section 2 Installing the AXIS 200+
This section provides a brief description of the unit connectors and
indicators, and describes the AXIS 200+ installation procedures.
Installation Summary
The AXIS 200+ is installed in these stages:
Stage 1. Unpacking and Checking the Hardware.
Stage 2. Identifying the Connectors and Indicators
Stage 3. Installing the Hardware
Stage 4. Assigning an Internet Address
Stage 5. Verifying the Installation
Stage 6. Adjusting the Focus
Stage 7. Adjusting the Image Parameters
Stage 8. Replacing the Lens