Section 2: Installing the AXIS 200+ AXIS 200+ Users Manual
20
4. Screw the new lens onto the AXIS 200+ CS ring, with the flat side
of the lock ring directed towards the new lens.
5. Screw the new lens assembly onto the AXIS 200+ unit.
6. If applicable, adjust the iris according to the lens documentation.
7. Adjust the focus. Reload your Web browser to monitor the results.
Zoom lens only: Turn the lens to maximum telephoto zoom and set
focus to infinity. Direct the camera towards a distant object and
adjust the back focus. Check that you obtain sharp pictures at
various zoom grades and various distances.
8. Tighten the lock ring.
new lens
CS ring
C/CS ring
lock ring
adapter
To Next Page
Loading...
