Axis 200+ - Using ARP in Windows 98 and Windows NT

Section 3: Assigning an IP Address AXIS 200+ Users Manual
26
Using ARP in
Windows 98 and
Windows NT
Follow these instructions to download the IP address and verify the
communication.
Start a DOS window and type the following commands:
Example:
The host will return 
Reply from
172.16.253.80
... or some
similar message. This indicates that the address has been set and the
communication is established.
Note:
❏ When you execute the ping command for the first time, you will
experience a significantly longer response time than usual.
arp -s <IP address> <Ethernet address>
ping <IP address>
arp -s
172.16.253.80
00-40-8c-10-00-86
ping
172.16.253.80