Axis 200+ - Server Push; Java Image Feed; CamImg

AXIS 200+ Users Manual Section 5: Using the AXIS 200+
47
Automatic Picture Updating
The AXIS 200+ supports three methods for automatic picture
updating, namely:
Server push
 Java image feed
 Refresh image feed
These are available from links on the AXIS 200+ Home Page.
Server Push
The Server push function continuously pushes new snapshots to your
Web browser.
The frame rate depends on how fast the AXIS 200+ can deliver the
snapshot data over the available network bandwidth. Therefore, you
cannot adjust the frequency of the Server push snapshots within your
Web browser.
In order to limit the memory overhead that this facility demands, a
maximum number of 5 clients can simultaneously activate a Server
push link to the same camera. Once this client threshold has been
exceeded, a single snapshot image is produced for all additional clients
that are trying to activate the link.
Note:
❏ The Server push function is currently supported by Netscape
Navigator only. However, you can download an ActiveX
component from the camera server web site that will provide the
same function within Internet Explorer.
Java Image Feed
This function is implemented within a Java applet, CamImg, that can
be started from anywhere on the network. The refresh rate is
programmable.
CamImg
CamImg is an easy-to-use Java applet that continuously displays a set
of images.