Section 5: Using the AXIS 200+ AXIS 200+ Users Manual
58
FTP will indicate File transfer complete or similar when the
file transfer is complete. The CRON script becomes active within one
minute after it has been downloaded to the AXIS 200+.
Example:
FTP session downloading a CRON script
C:\Temp>ftp 172.16.253.80
Connected to 172.16.253.80.
220 AXIS 200+ Jun 6 1998 ready.
User (172.16.253.80:(none)): root
331 User name ok, need password
Password:
230 Root user logged in
ftp> bin
200 TYPE set to I.
ftp> put cron.txt cronscript
200 PORT command successful.
150 Opening data connection for cronscript
(172,16,4,70,4,6), (mode binary).
226- Compilation OK
Events initiated
226 File transfer complete
112 bytes sent in 0.00 seconds (112000.00 Kbytes/sec)
ftp> quit
221 Goodbye.
To Next Page
Loading...
