Section 5: Using the AXIS 200+ AXIS 200+ Users Manual
62
1. Connect the remote modem to the serial port of the AXIS 200+
(US Robotics modem recommended).
2. From the Windows desktop, double click on the My Computer icon
and then open Dial-Up Networking.
3. Double click on Make New Connection. From within this dialog,
define a name that describes the connection you are creating in the
Type name for the computer you are dialing field. Select a local
modem from the displayed modem list.
4. Click Configure... to open the Modem Properties dialog box.
Accept all default settings but ensure that modem speed is
compatible with your modem and does not exceed 38,400 bps,
which is the maximum serial port speed for the AXIS 200+.
5. Click the Connection tab and then click Advanced... Check Use
flow control and select Hardware (RTS/CTS). Click OK to return
to the Make New Connection dialog.
6. Enter the relevant phone number information for the remote
modem connected to your AXIS 200+. Click Next.
7. Click Finish. The system then proceeds to build the Driver
information database and your connection dialog will then
subsequently appear in the Dial-Up Networking dialog.
Accessing the Remote
AXIS 200+
Follow this procedure to dial out to a remote AXIS 200+.
1. Double click on the newly created icon to establish a modem
connection for your remote AXIS 200+.
2. Enter your username and password and then click Connect. The
status dialogs "Dialing" and "Logging onto the network" are
presented prior to the display of a Connected to
<name> dialog that
will confirm a successful connection.
You can now access the AXIS 200+ by entering the name or Internet
address (URL) into the location field of your Web browser. Please
ensure that you are not using a proxy server (Netscape: Options
menu\Select Network\Proxies)
To Next Page
Loading...
