AXIS 200+ Users Manual Section 6: Updating the Software
77
Note:
If you need to force a download, e.g. when degrading to an older
software, use the syntax:
Example
5. The AXIS 200+ will report
Transfer complete, flash
programming finished OK
once the programming is complete.
Caution
❏ In controlled environments, Flash memory upgrades provide a
very safe method for updating software. However, Flash products
may easily become damaged if this operation is left to
inexperienced persons. Units that become damaged due to misuse
will need to be sent back to your dealer who in such
circumstances, may charge for any necessary repairs. Therefore, it
is highly recommended that Flash memory upgrades are
performed by persons knowledgeable in this area.
put
axis200p.bin FLASH
To Next Page
Loading...
