Axis 200+ - Serial Connector; Power Supply

AXIS 200+ Users ManualAppendix C: Technical Specifications
81
Serial Connector
A 9 pin D-sub connector provides the physical RS232 serial interface
to a modem server within the AXIS 200+. The functionality of this
connector is fully discussed in Appendix E - The RS232 Serial Port .
Mounting Assembly
Can be used standalone or mounted on a wall. Uses a standard camera
1/4 inch nut.
Operating
Temperature
40-105°F (5-40°C).
Humidity
20-80% RHG, non-condensing.
Approvals
EMC: FCC Class A
CE: EN 55022/1987, EN50082- 1/1992
Safety: EN 60950, UL, CSA.
Size
Height 1.6 in (4.0 cm)
Width 4.9 in (12.5 cm)
Length 6.1 in (15.5 cm).
Weight
1.0 lb. (0.5 kg), excluding power supply.
Power Supply
12V AC, 9.6 VA, via external power supply (PS-D).
Alternative power input:
11 - 18V DC, min 600mA
10 - 15V AC, min 7VA
All specifications are subject to change without prior notice.