Axis 200+ - Page 98

AXIS 200+ Users Manual Appendix E: The RS232 Serial Port
97
Zmodem
Once connection to the AXIS 200+ has been established, you can
initiate a file transfer. Simply type the
sz command followed by the
filename of file you wish to transfer, as follows:
A typical zmodem session is detailed below:
Typical zmodem session
sz fullsize.jpg
at
OK
atdt555-1212
Welcome!
You are connected to the host shell of your AXIS
Camera Server.
Try 'help' for a list of available commands, or
just ‘sz fullsize.jpg’ to download an image.
$ sz fullsize.jpg
**B00000000000000
>> Notice: Redirecting stdin/stdout.
>> Notice: Executing the command ``cd ~/dl/modem
; rz ; xv *& ; sleep 2;
rm *''.
rz waiting to receive.
Receiving: fullsize.jpg
Bytes received: 24188/ 24188: 3020 Bytes per
sec
Transfer complete.
Transfer complete.
$