Axis C1610-VE - Page 9

AXISC1610-VENetworkSoundProjector
Additionalsettings
4.3Enteranamefortherule.
4.4UnderCondition,selectSpeakertestresult.
4.5UnderSpeakerteststatus,selectDidn’tpassthetest.
4.6UnderAction,selectSendnoticationtoemail.
4.7UnderRecipient,selectyourrecipient(“Speakertestrecipients”)
4.8Enterasubjectandamessage,andclickSave.
Playaudiowhenacameradetectsmotion
ThisexampleexplainshowtosetuptheaudiodevicetoplayanaudioclipwhenanAxisnetworkcameradetectsmotion.
Prerequisites
•TheAxisaudiodeviceandAxisnetworkcameraarelocatedonthesamenetwork.
•Themotiondetectionapplicationisconguredandrunninginthecamera.
1.Prepareanaudiocliplink:
1.1GotoAudio>Audioclips.
1.2Click
>Createlinkforanaudioclip.
1.3Setthevolumeandnumberoftimestorepeattheclip.
1.4Clickthecopyicontocopythelink.
2.Createanactionrule:
2.1GotoSystem>Events>Recipients.
2.2Click+Addrecipient.
2.3Typeanamefortherecipient,forexample“Speaker”.
2.4SelectHTTPfromtheTypedrop-downlist.
2.5PastetheconguredlinkfromtheaudiodeviceintheURLeld.
2.6Entertheusernameandpasswordoftheaudiodevice.
2.7ClickSave.
2.8GotoRulesandclick+Addarule.
2.9Typeanamefortheactionrule,forexample"Playclip".
2.10FromtheConditionlist,selectavideomotiondetectionalternativeunderApplications.
Note
Iftherearenooptionsforvideomotiondetection,thengotoApps,clickAXISVideoMotionDetectionand
turnonmotiondetection.
2.11FromtheActionlist,selectSendnoticationthroughHTTP.
2.12UnderRecipient,selectyourrecipient.
2.13ClickSave.
9