Axis Camera Station - Page 22

Page 22 AXIS Camera Station Installation Guide
Monitor
I/O
When clicking this button, the I/O Status of
I/Os defined in AXIS Camera Station are
displayed. Monitoring I/O defines when
events, such as an alarm or motion detection,
should be triggered. Each I/O is shown on one
line, along with a colored indicator:
• green indicator means the I/O is in its normal
state
• red indicates that the I/O is active, record-
ing may be in progress depending on the
setup.
• yellow means there is no communication
with the I/O
Buttons for starting and stopping an I/O
output are shown, as well as a button to open
the camera’s view.
See AXIS Camera Station User’s Manual for
instructions on defining I/O.
Camera sequence Click to open the Camera sequence window. A
camera sequence is a pre-defined "tour" i.e. a
configuration that automatically switches
through all of the cameras included in the
tour. Select the camera sequence to view from
the drop-down list. See the User’s Manual for
instructions on setting up a Camera Sequence.
Playback
Recorded events
Here you can search through recorded events.
Select a date, a time and press the search
button to get an overview of all the recorded
events. Click on a reference image to open a
Playback window to view the entire recording
of the event.