Axis P3245 Series User Manual

AXISP3245NetworkCameraSeries
Configureyourdevice
4.Inthelistofactions,underOverlaytext,selectUseoverlaytext.
5.Selectavideochannel.
6.InText,type“Motiondetected”.
7.Settheduration.
8.ClickSave.
Note
Ifyouupdatetheoverlaytextitwillbeautomaticallyupdatedonallvideostreamsdynamically.
Sendlivevideotoamobilephone
Inthisexample,wesetupthecameratomakeaSIPcalltoamobilephonewhenthecameradetectsmotion.TheSIPcalltransmits
thelivevideostreamfromthecameratothemobilephone.
Beforeyoustart
•InstallaSIPclientonamobilephone.
•RegisterwithaSIPserverorPBX.
•SetupAXISVideoMotionDetectioninthecamera.
MakebasicSIPsettings
1.GotoSettings>System>SIP.
2.SelectAllowSIP.
3.ClickNATtraversalandenableSTUN.
4.Typetheserveraddress.
5.ClickSave.
SetuparegisteredSIPaccountonthecamera
1.GotoSettings>System>SIPandclick
underAccounts.
2.ClickRegistered.
3.Typeanamefortheaccount,forexample“Registered”.
4.Typeauserid,domain,password,andregistrar.
5.ClickSave.
Createarecipient
1.GotoSettings>System>Events>Recipientsandaddarecipient.
2.Typeanamefortherecipient,forexample“SIPclient”.
3.InType,selectSIP.
4.InToSIPaddress,typetheSIPaddress.
5.InFromSIPaccount,selectRegistered.
6.Totesttheconnection,clickTest.
7.ClickSave.
14

Axis P3245 Series Specifications

General

Image Sensor	1/2.8" Progressive scan CMOS
Lens	2.8-10 mm
Video Compression	H.264
Audio Support	Two-way audio
Frame Rate	30 fps at 1920 x 1080
Edge Storage	SD/SDHC/SDXC (up to 256 GB)
Network Interface	10/100 Mbit/s Ethernet
Day & Night Functionality	Yes (ICR)