Axis P3245 Series User Manual

AXISP3245NetworkCameraSeries
Configureyourdevice
SetupthecameratomakeaSIPcallwhenitdetectsmovement
1.GotoSettings>System>Events>Rulesandaddarule.
2.Typeanamefortherule,forexample“VMDtriggersSIPcall”.
3.Inthelistofconditions,underApplications,selectVMD4.
4.Inthelistofactions,underCalls,selectMakeSIPcalls.
5.Inthelistofrecipients,selectSIPclient.
6.ClickSave.
Sendanemailautomaticallyifsomeonespraypaintsthelens
Activatethetamperingdetection:
1.GotoSystem>Detectors>Cameratampering.
2.SetavalueforTriggerdelay.Thevalueindicatesthetimethatmustpassbeforeanemailissent.
3.TurnonTriggerondarkimagestodetectifthelensissprayed,covered,orrenderedseverelyoutoffocus.
Addanemailrecipient:
4.GotoSystem>Events>Recipientsandaddarecipient.
5.Typeanamefortherecipient.
6.SelectEmail.
7.Typeanemailaddresstosendtheemailto.
8.Thecameradoesn’thaveit’sownemailserver,soithastologintoanotheremailservertosendmails.Fillintherestofthe
informationaccordingtoyouremailprovider.
9.Tosendatestemail,clickTest.
10.ClickSave.
Createarule:
11.GotoSystem>Events>Rulesandaddarule.
12.Typeanamefortherule.
13.Inthelistofconditions,underVideo,selectTampering.
14.Inthelistofactions,underNotications,selectSendnoticationtoemailandthenselecttherecipientfromthelist.
15.Typeasubjectandamessagefortheemail.
16.ClickSave.
15

Axis P3245 Series Specifications

General

Image Sensor	1/2.8" Progressive scan CMOS
Lens	2.8-10 mm
Video Compression	H.264
Audio Support	Two-way audio
Frame Rate	30 fps at 1920 x 1080
Edge Storage	SD/SDHC/SDXC (up to 256 GB)
Network Interface	10/100 Mbit/s Ethernet
Day & Night Functionality	Yes (ICR)