Need help?Do you have a question about the Axis T8129-E and is the answer not in the manual?
General| Category | Extender |
|---|---|
| Model | T8129-E |
| Manufacturer | Axis |
| Product Type | Network Extender |
| Power over Ethernet (PoE) | Yes |
| Ingress Protection (IP) Rating | IP66 |
| Ethernet Ports | 2 |
| Ethernet Data Rate | 10/100/1000 Mbps |
| Connectivity Technology | Wired |
| Certifications | CE, FCC, UL |
| Operating Temperature | -40 to 75 °C |
| Humidity | 10 to 100% RH |
| Dimensions | 90 mm x 90 mm x 36 mm |
| Data Transfer Rate | 1 Gbps |
| Data Link Protocol | Ethernet |
| Features | PoE Passthrough |
| Form Factor | Wall Mount |
Product complies with CE marking directives and harmonized standards.
Equipment designed and tested to fulfill applicable standards for radio frequency emission and immunity.
Equipment tested for compliance with FCC Rules for Class B digital device and potential radio frequency interference.
Digital apparatus complies with CAN ICES-3 (Class A) and requires shielded network cable (STP) connection.
Digital equipment fulfills RF emission requirements according to Class B limit of EN 55032.
Digital equipment fulfills RF emission requirements according to Class B limit of AS/NZS CISPR 32.
Product complies with SJ/T 11364-2014, Marking for restriction of hazardous substances.
Product shall not be disposed of with household or commercial waste, WEEE directive applies.
General safety instructions for product usage, installation, cleaning, and maintenance.
To Next Page