Need help?Do you have a question about the Axis T91G61 and is the answer not in the manual?
General| Brand | Axis |
|---|---|
| Model | T91G61 |
| Category | Racks & Stands |
| Language | English |
Tighten the mount base screw for secure attachment.
Position and secure wall bracket using a level.
Insert and tighten screws to fix the bracket.
Route cables through the designated opening.
Secure cables with ties for organization.
Connect cables and attach the main mount body.
Tighten the camera mount base screw for secure attachment.
Position and secure camera bracket using a level.
Insert and tighten screws to fix the bracket.
Route camera cables through the designated opening.
Connect cables and attach the main camera unit.
Connect the power cable to the designated terminal.
Connect the network cable to the designated terminal.
Drill a hole for cable entry using specified tool.
Connect the camera to the mount assembly.
Rotate camera housing to the desired position.
Secure the camera using four T30 screws.
Connect all necessary cables to the camera.
Place the cable cover onto the mount.
Attach the main cover securely to the mount.
Perform the final tightening of the mount.
To Next Page
