Axminster Craft AC200BDS - EU Declaration of Conformity; Safety Symbols and Guidance

Index of Contents
2
EU Declaration of Conformity
Fully read manual
and safety instructions
before use
Eye protection
should be worn
Ear protection
should be worn
HAZARD
Motor gets hot
Dust mask
should be worn
The symbols below advise the correct safety procedures when using this machine.
Cert No: BD4800
Axminster Tools & Machinery Ltd
Axminster Devon
EX13 5PH UK
axminster.co.uk
Type Belt & Disc Sander
Model AC200BDS
and conforms to the machinery example for which the
EC Type-Examination Certificate No AM 50413122
has been issued by Wendeng Allwin Motors Manufacturing Co., Ltd.
at: No. 15 Sichan Road Wendeng, Shandong 264400 China
and complies with the relevant essential health and safety requirements.
2006/42/EC
EN 62841-1:2015
EN ISO 12100:2010
declares that the machinery described:-
This machine complies with the following directives:
EU Declaration of Conformity
Signed
Andrew Parkhouse
Operations Director
Date: 16/07/2018
EU Declaration of Conformity 02
What’s Included 03
Introduction 04
Packaging 04
General Instructions for 230V Machines 04
Specific Safety Precautions for Sanding Machines 05
Specification 05
Assembly 06-07-08-09
Illustration and Parts Description 10-11
Set Up and Adjustment 12
Operating Instructions 13
Changing the Abrasive Belt/Disc 14-15-16-17
Maintenance 18
Exploded Diagrams/Lists 19-20-21
Wiring Diagram 22
Notes 23