EasyManua.ls Logo

Axminster Trade AT260PT User Manual

Axminster Trade AT260PT
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
AT260PT / AT260SPT
AT310SPT
Planer Thicknesser
AT260PT Code 508498
AT260SPT Code 101156
AT310SPT Code 101157
Code: 101157 with Spiral Blades
Code: 508498 with HSS Blades
Code: 101156 with Spiral Blades
Original Instructions
AT&M: 14/09/2018
BOOK REF : 101612
Question and Answer IconNeed help?

Do you have a question about the Axminster Trade AT260PT and is the answer not in the manual?

Axminster Trade AT260PT Specifications

General IconGeneral
Planing Width260mm
Planing Depth3mm
Max. Depth of Cut Thicknessing3mm
Feed Speed8 m/min
Dust Extraction Outlet100mm
Planer TypePlaner Thicknesser
Cutter Block3 knives

Summary

What's Included

Machine Components List

Detailed list of parts included with the planer thicknesser.

General Instructions and Safety Precautions

230V Machine General Safety

Guidelines for safe operation of 230V machines.

Planer Thicknesser Specific Safety

Precautions for using planer thicknesser functions safely.

Machine Specifications

AT260PT/AT260SPT Specifications

Technical details for AT260PT and AT260SPT models.

AT310SPT Specifications

Technical details for the AT310SPT model.

Machine Assembly

Unpacking and Initial Placement

Steps for safely removing the machine from packaging and positioning.

Guard and Arm Mounting

Installing cutter block side guard and overhead guard arm.

Fence Assembly Mounting

Attaching the fence assembly, including bracket and tilt mechanism.

Fence Handle and Storage Bracket Installation

Fitting lift/shift handles and fence storage brackets.

Illustration and Parts Description

Main Machine Components Identification

Identifying major parts and controls on the machine.

Table and Fence Mechanism Details

Explaining table extensions, locks, and fence adjustments.

Fence Angle and Adjustment Controls

Identifying fence angle pointers and adjuster screws.

Cutter Block and Roller Identification

Identifying cutter block, blades, pressure rollers, and anti-kickback fingers.

Thicknessing Table and Spiral Cutter Block Details

Explaining thicknessing table assembly and spiral cutter blocks.

Setting Up the Machine

Digital Thickness Display Calibration

Calibrating the digital display for accurate thickness settings.

Fence Alignment and Adjustment

Setting fence angles (90°/45°) and checking alignment.

Surface Table Levelling

Ensuring infeed and outfeed tables are correctly levelled.

Thicknessing Table Height Setting

Adjusting the thicknessing table to the desired height.

Operating Instructions

Setting Up for Planing Mode

Preparation steps before operating in planing mode.

Setting Up for Thicknessing Mode

Preparation steps before operating in thicknessing mode.

Emergency Stop and Motor Control

Using emergency stops and starting/stopping the motor.

Changing the Cutter Block Blades

Replacing Standard Planer Blades

Step-by-step guide for fitting standard planer blades.

Setting Blade Height and Alignment

Ensuring blades are set correctly for optimal performance.

Installing Self-Adjustable Blade Holders

Instructions for fitting self-adjustable blade holder kits.

Spiral Cutter Blocks

Rotating Spiral Cutters

Procedure for rotating spiral cutters to a new edge.

Machine Maintenance

Daily, Weekly, and Monthly Checks

Routine maintenance tasks for optimal machine condition.

Drive Belt Tension Adjustment

How to check and adjust the drive belt tension.

Exploded Diagrams and Parts Lists

AT260PT/AT260SPT Diagram A and Parts List

Exploded view and component list for Diagram A.

AT310SPT Diagram A and Parts List

Exploded view and component list for AT310SPT Diagram A.

Wiring Diagrams

AT260PT/AT260SPT Wiring Schematic

Electrical schematic for AT260PT and AT260SPT models.

AT310SPT Wiring Schematic

Electrical schematic for the AT310SPT model.