Page 4
1315 Directors Row Suite 107 Fort Wayne, IN 46808
(260)496-9668
www.atterotech.com
3.2– Factory Reset
*************************** IMPORTANT ************************
The factory reset returns the entire device to its factory
defaults. Using this feature will mean all custom settings will
be cleared.
*******************************************************************
*NOTE: The factory reset is a useful way of quickly restoring
communications with a device which has an unknown static IP
address, as a factory reset returns the device’s network settings
to getting a dynamic IP. Having successfully completed a factory
reset of the device, setting the PC’s IP address to also obtain a
dynamic IP address should then allow the PC to communicate fully
with that device.
Figure 4 - Reset button access
The factory reset is performed on the front panel of the unit. The
function is activated by pressing and holding the encoder button
and the menu toggle button simultaneously for 5 seconds. The
unit will initialize and all user settings including any assigned
menu content will be cleared.
3.3 – Firmware Updates
The C1 supports field firmware updates. The updates are applied
via the network using Attero Tech unIFY Control Panel’s smart
firmware update tools within the application. The latest C1 SFU
file is available from the Attero Tech online support desk.
To Next Page
Loading...
Need help?
General