“Pairing”
Indicates that the earphones are in discoverable mode.
“Connected”
Confirms that the earphones are connected to your
bluetooth device.
Note: When using both earphones, you will hear a
second “Connected” prompt when the secondary earphone
connect to the primary earphone for Left-Right stereo mode.
“Disconnected”
Indicates that the earphones have lost their bluetooth connection to your device.
“ANC On”
Indicates Active Noise Cancellation mode is activated. (20-25dB)
“ANC Off”
Indicates Active Noise Cancellation mode is deactivated.
“Voice Through”
Allows some environmental sounds through to the earphones.
“Low Battery”
Lets you know when your earphones have less than 30% battery life left.
To Next Page
Loading...