3
Product Features
Installing the DMH25 with Jensen / Dual / Axxera
Multimedia Receiver’s with HDMI Input
1. Connect the DMH25 to the receiver’s HDMI and USB
port (Jensen) as shown in the below illustration:
3
2
1
4
1. HDMI Cover - Keeps the adapter connector protected
when not in use.
2. HDMI Connector - Connects to HDMI input on
multimedia receiver or HDTV.
3. microUSB Connector - Insert the included microUSB
cable into this port to provide power for the Wi-Fi
adapter. Most Dual / Axxera receivers do not require
external power for the DMH25 to work. Power is
supplied through the HDMI connector on Dual / Axxera
receivers.
4. Reset Button - Press and hold the reset button for 20
seconds to reset the DMH25. External USB power
must be connected to reset the unit.
To Next Page
Loading...