Axxess AX-ADXSVI Series User Manual

CAUTION! All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
AX-ADXSVI
INSTALLATION INSTRUCTIONS
AxxessInterfaces.com © COPYRIGHT 2017 METRA ELECTRONICS CORPORATION REV. 8/28/17 INSTAX-ADXSVI
INTERFACE FEATURES
INTERFACE COMPONENTS
TOOLS REQUIRED
• Cutting tool • Crimping tool • Tape
• Connectors (example: butt-connectors, bell
caps, etc.)
AX-ADXSVI Series main interface control box
• Provides accessory (12-volt 10-amp)
• Retains R.A.P. (retained accessory power)
• Used in non-amplified systems or when replacing amplified systems
• Provides NAV outputs (parking brake, reverse, mute, V.S.S.)
• Prewired ASWC-1 harness included (ASWC-1 sold separately)
• Retains 3.5mm AUX jack (Ram)
• Retains back-up camera, if through the OE radio (Ram)
• High level speaker input
• USB updatable
Note:
This is a general list for the AX-ADXSVI lineup. Please see the individual harnesses for exact features available.
• AX-ADXSVI interface
APPLICATIONS
See inside front cover

Axxess AX-ADXSVI Series Specifications

General

Brand	Axxess
Model	AX-ADXSVI Series
Category	Automobile Electronics
Language	English

Summary

Interface Components

AX-ADXSVI Interface

The primary interface module within the AX-ADXSVI system for vehicle integration.

Interface Features

Accessory Power and RAP Retention

Provides 12V/10A accessory power and retains accessory power functionality.

Navigation and Audio Outputs

Includes NAV outputs (parking brake, reverse, mute, V.S.S.) and retains 3.5mm AUX jack.

Camera and Speaker Connectivity

Retains backup camera through OE radio and provides high-level speaker input.

ASWC-1 Harness and USB Update

Features a prewired ASWC-1 harness and is USB updatable.

Tools Required

Essential Tools for Installation

Lists necessary tools like cutting tools, crimping tools, tape, and connectors.

Applications by Vehicle Make

Audi Applications

Lists compatible Audi models and model years for the interface.

Chrysler and Dodge Applications

Specifies compatible Chrysler and Dodge vehicles and their respective years.

Ford Applications

Details compatible Ford models, including specific trim notes.

Jeep and Fiat Applications

Outlines compatibility for Jeep and Fiat vehicle models and years.

GM and Mitsubishi Applications

Covers compatible GM (Cadillac, Chevrolet) and Mitsubishi vehicles.

Volkswagen and Mazda Applications

Lists compatible Volkswagen and Mazda vehicle models and years.

Lincoln and Mercury Applications

Details compatibility for Lincoln and Mercury vehicle models.

Chevrolet and Pontiac Applications

Lists compatible Chevrolet and Pontiac models and specific year ranges.

Isuzu and Oldsmobile Applications

Covers compatibility for Isuzu and Oldsmobile vehicle models.

Mercedes and Freightliner Applications

Specifies compatible Mercedes and Freightliner vehicles, including Sprinter models.

Dodge and Volkswagen Applications (Cont.)

Continues listing Dodge and Volkswagen compatibility, including specific notes.

Saturn and GMC Applications

Details compatibility for Saturn and GMC vehicle models.

Hummer and Suzuki Applications

Outlines compatibility for Hummer and Suzuki vehicle models.

Important Installation Notes

Technical Support and Troubleshooting

Provides contact information for technical support and advice for troubleshooting.

Installer Certification and Training

Recommends MECP certified technicians and promotes installer training.