What to do if my Axygen Laboratory Equipment centrifuge will not start?
If your Axygen Laboratory Equipment centrifuge won't start, first ensure it's properly connected to a power source. Check the power cord connection and its quality. Also, inspect the fuse and replace it if it's blown.
Why does my Axygen AxySpin R C2500-R-AXY Laboratory Equipment centrifuge show a rotor imbalance error?
A rotor imbalance error on your Axygen Laboratory Equipment centrifuge can occur for several reasons: * Tubes are not inserted symmetrically in rotor holes: Load tubes symmetrically. * Sample liquid in tubes not properly balanced: Ensure the same volume of liquid is in each tube. * Defective or improperly adjusted balance sensor: Call for service. * Rotor is stuck when a run starts: Call for service.
What to do if the lid lock will not release on my Axygen AxySpin R C2500-R-AXY Laboratory Equipment centrifuge?
If the lid lock on your Axygen Laboratory Equipment centrifuge won't release, it could be due to several reasons: * Defective lid lock: Open manually and have the unit serviced. * No power from PC board: Call for service. * Lid lock jammed: Call for service.
General| Manufacturer | Axygen |
|---|---|
| Product Name | AxySpin R |
| Model Number | C2500-R-AXY |
| Tube Size | 0.2 mL to 2.0 mL |
| Sterile | No |
| Max Speed | 2500 RPM |
| Timer | No |
| Power Supply | 50/60Hz |
To Next Page
