The provided document is a user manual for the Siena Whirlpool Pedicure Spa, manufactured by AYC Group LLC under the MAYAKOBA brand. This device is an elegant and well-designed pedicure spa chair intended for use in nail salons. It combines a comfortable massage chair with a functional pedicure basin, offering a comprehensive spa experience.
Function Description
The Siena Pedicure Spa is designed to provide a relaxing and therapeutic pedicure experience. It features a massage chair for client comfort and a whirlpool basin for foot soaking and treatment. The spa includes a pipeless jet motor for water circulation, ensuring a hygienic and efficient whirlpool action. It also incorporates hot and cold water supply capabilities, allowing technicians to adjust water temperature to client preference. An optional discharge pump is available for efficient water drainage, particularly for wall drain installations. The chair's various components, such as the back cushion, seat cushion, and footrest, are designed for user comfort and ease of maintenance. The remote control allows clients to adjust massage settings and other chair functions.
Important Technical Specifications
The Siena Pedicure Spa has specific electrical and plumbing requirements to ensure safe and efficient operation.
Dimensions & Weight:
- Shipping: 60" x 40" x 46" (approximate), 281 lbs.
- Net: 65" x 31" x 56" (approximate), 230 lbs.
- Fully Up: 55.5" height
- Fully Reclined: 49.5" height
- Base Width: 22" (front), 24" (back)
- Base Depth: 24.5"
- Chair Width (Armrest to Armrest): 30.5"
- Chair Depth: 22.5"
- Open Arm Tray: 8.25"
- Distance from Wall (minimum for recline): 21" (54cm)
- Recommended Clearance Between Chairs: 30" (center of chair to center of chair: 60")
Basin Capacity:
- 4.5 Gallons (approximate)
Electrical Service:
- Power Source: Dedicated 15Amp Wall Outlet Required.
- Voltage/Frequency: 110V, 60Hz.
- Circuit Breaker: Main circuit breaker MUST be 25Amp to allow a maximum of two units per outlet.
- GFCI Protection: A GFCI protected grounded circuit MUST be used for each individual pedicure spa.
- Pipeless Jet Motor: 1.0 A.
- Discharge Pump (Optional): 115V, 0.95 A.
- Massage System: 120V, 60Hz.
Water Pressure:
- Normal Operating Pressure: 30 to 80 P.S.I.
- Maximum Pressure: 150 psi (10 bars).
- Minimum Pressure: 10 psi (69kPa).
Water Temperature:
- Hot Water Supply (maximum): Must not exceed 140F.
- Working Temperature: 33F to 140F constant; intermittent to 180F (0.6C to 60C sustained; intermittent to 82.2C).
Recommended Flow:
Plumbing Source:
- Hot Water Connection: 1/2".
- Cold Water Connection: 1/2".
- Drain Connection: 1" (See Plumbing Instruction).
- Drainage Options: Floor (Gravity) Drain or Wall Drain (requires discharge pump).
- Backflow Preventor/Vacuum Breaker: Not supplied by the manufacturer; MUST be provided by the plumber according to building code requirements.
- Check Valve for Drain: Not provided; MUST be installed by a licensed plumber.
Weight Capacity:
- The unit has a weight capacity of 300 lbs.
Certifications:
- All MAYAKOBA pedicure spa chairs are UL and ETL listed.
Usage Features
The Siena Pedicure Spa is designed for ease of use by both technicians and clients.
Chair Operation:
- Remote Control: The chair features a remote control for adjusting massage functions and seat positions (forward/backward movement).
- Adjustable Seat and Back: Both the back of the chair and the seat are adjustable, allowing clients to find a comfortable position.
- Foldable Tray: Armrests include foldable trays for convenience.
Basin Operation:
- Water Spout and Faucet: Used for filling the basin with water.
- Magna Jet: The pipeless jet motor provides whirlpool action. It is activated by an On/Off Air Activated Switch located on the front panel.
- Drain Plug and Knob: The drain plug is placed in the drain from the top, and the drain knob is turned counterclockwise to close it for filling. Turning the knob clockwise opens the drain.
- Sprayer Head: A sprayer head is included for rinsing the basin.
- LED Light: The basin includes an LED light for ambiance.
- Footrest: An adjustable footrest is provided for client comfort during pedicures.
Safety Precautions:
- Users should not stand inside the basin or on the spa.
- Water temperature should be checked before use and not exceed 100F (38C).
- Clients should enter and exit the spa slowly and carefully.
- No electrical devices should be brought near or operated with the pedicure spa.
- Small children should not be allowed to use or play around the chair.
- The unit is for indoor use only.
- Power supply cord must be disconnected before servicing and cleaning.
- The basin MUST be filled with water to the level indicator before running the whirlpool jet to prevent dry running.
- The drain knob should not be spun excessively to avoid stripping the gear.
- The discharge pump (if equipped) should only be turned on when adequate water is in the tub; running it dry will void the warranty.
Maintenance Features
Proper maintenance is crucial for the longevity and hygiene of the Siena Pedicure Spa.
Daily Cleaning:
- Whirlpool Jet Cleaning: After each client, ensure the magnetic jet motor is fully stopped before removing the magnetic jet head, jet cover, and impeller for sanitization. These components can be turned counterclockwise to remove.
- System Flush: At the end of each day, the whirlpool system should be flushed for 10 minutes with a low-sudsing detergent and warm water, or an EPA-registered cleanser.
- Rinsing: After flushing, rinse the system with clean fresh water and drain.
- Basin Cleaning: Daily cleaning helps minimize the buildup of oil-based products on the jet system and basin surface.
General Maintenance:
- Disconnect Power: Always disconnect the power supply cord before servicing and cleaning.
- Avoid Harmful Agents: Staining, fading, or discoloration of plastic surfaces can occur due to exposure to harmful cleaning agents or chemicals.
- Water Additives: Improper or poor water additives not related to proper water maintenance can cause staining, fading, or discoloration.
Warranty Information:
- Warranty Period: 1 year for listed components, dating from the date of delivery.
- Covered Parts (Massage Chair Top): Main PC board, seat frame actuators, remote control (excluding cracked screens, broken buttons, and water damage).
- Covered Parts (Pedicure Spa Base/Tub): Faucet, sprayer, waterspout, hot/cold water hoses, jet motor, LED light, drain assembly, on/off air buttons, electrical control box, discharge pump motor.
- Exclusions: Natural wear and tear (staining, fading, discoloration of vinyl seat, armrests, footrest), damage from standing in the basin, damage to pump/motor parts due to plumbing obstructions, staining/fading/discoloration of plastic surfaces from chemicals or improper water additives, malfunctions from improper installation, freight damage, misuse, neglect, abuse, natural disaster, unauthorized repairs, natural wear and tear of remote control (broken buttons, cracked screens, water damage).
- Responsibility: Owner is responsible for all labor and shipping charges for replacements or repairs.
- Voided Warranty: Warranty is void if the spa is removed from its initial installation location, not installed according to codes, or subjected to misapplication, misuse, improper installation/maintenance, negligence, or improper cleaning. Running the discharge pump dry will also void the warranty.
- Service: For service, contact the local distributor or online retailer. Serial numbers and original invoice are required for all warranty claims. Customers are responsible for shipping defective parts back to AYC within 30 days of receiving new parts. Photos and original invoice may be required for claims that cannot be determined over the phone. Unauthorized repairs void the warranty.
Need help?
General
To Next Page