Need help?Do you have a question about the Ayra TDC 33 and is the answer not in the manual?
Light Source| LED count | 4x 3W LED |
|---|---|
| LED colors | 1x Red, 1x Green, 1x Blue, 1x White |
Power| voltage | AC100-240V 50Hz/60Hz |
|---|---|
| power consumption | 25W |
Connectors| DMX connectors | 3p XLR male and female |
|---|---|
| power input connector | IEC Power input |
| power output connector | IEC Power Link output |
Weight and Dimensions| dimensions | 380 x 380 x 290 mm (bracket folded) |
|---|---|
| weight | 4.5 kg |
Covers electrical hazards, adult supervision, and qualified personnel requirements for safe operation.
Details proper handling, environmental suitability, power connection, and usage practices to prevent damage.
Guidelines for storing, transporting, and maintaining the device's exterior integrity.
Instructions for safely locating, replacing, and securing fuses with correct ratings.
Lists the components provided within the product packaging for initial setup.
Procedures for checking the unit and accessories for any visible damage before connecting power.
Identifies key physical parts, input/output ports, and controls on the lighting fixture.
Explains how to set DMX address, master/slave, auto, sound, and display modes via the unit's menu.
Details how to view fixture operating hours and check the installed software version.
Describes Auto, Sound, and Slave modes for creating synchronized lightshows without external controllers.
Details the DMX channel functions, value ranges, and how to control the fixture via a DMX controller.
Lists technical details including light source, dimensions, weight, power requirements, and included accessories.
Illustrates DMX and electrical connector pinouts and the corresponding wiring diagrams.
To Next Page
