This LYNX CONTROL left the factory in perfect condition. In order to maintain this condition and
to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and
warning notes written in this user manual.
The LYNX CONTROL shall only be used with right voltage and frequency.
Make sure that the available voltage is not higher than stated at the end of this manual.
Make sure the power cord is never crimped or damaged by sharp edges.
If the external flexible cable or cord of this device is damaged, it shall be exclusively replaced by the
manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
Please be aware that damages caused by manual modifications to the LYNX CONTROL are not
subject to warranty. Keep away from children and non-professionals.
GENERAL GUIDELINES
Ø Do not use this device until you are familiar with its functions. Do not permit operation by
persons not qualified for operating the device. Most damages are the result of unprofessional
operation.
Ø For safety reasons, please be aware that all modifications on the LYNX CONTROL are
forbidden.
Ø If this device is operated in any way different to the one described in this manual, the product
may suffer damages and the guarantee becomes void. Furthermore, any other operation may lead
to dangers like short-circuit, burns, electric shock, etc.
To Next Page
