Areas of application
Education and teaching: Use in schools, universities and training centres to teach the basics of electronics, programming and
embedded systems. Research and development: Use in research and development projects to create prototypes and
experiments in the fields of electronics and computer science. Prototype development: Use in the development and testing of
new electronic circuits and devices. Hobby and maker projects: Use by electronics enthusiasts and hobbyists to develop and
implement DIY projects.
Required knowledge and skills
Basic understanding of electronics and electrical engineering. Knowledge of programming, especially in the programming
language C/C++. Ability to read circuit diagrams and design simple circuits. Experience in working with electronic
components and soldering.
Operating conditions
The product may only be operated with the voltages specified in the data sheet in order to avoid damage. A stabilised direct
current source is required for operation. When connecting to other electronic components and circuits, the maximum current
and voltage limits must be observed in order to avoid overloads and damage.
Environmental conditions
The product should be used in a clean, dry environment to avoid damage from moisture or dust. Protect the product from
direct sunlight (UV)
Intended use
The product is designed for use in educational, research and development environments. It is used for the development,
programming and prototyping of electronic projects and applications. The sensor product is not intended as a finished
consumer product, but as a tool for technically skilled users, including engineers, developers, researchers and students.
Non-intended foreseeable use
The product is not suitable for industrial use or safety-relevant applications. The product is not authorised for use in medical
devices or for the purposes of air and space technology
Waste disposal
Do not dispose of with household waste! Your product must be disposed of in an environmentally friendly manner in
accordance with the European directive on waste electrical and electronic equipment. The valuable raw materials it
contains can then be reused.
are supplied. The application of this directive contributes to environmental and health protection. Use the collection centre
set up by your local authority for the return and recycling of old electrical and electronic equipment. WEEE-Reg. No.: DE
62624346
Electrostatic discharge
Caution: Electrostatic discharges can damage the product. Note: Earth yourself before touching the product, for example
by wearing an antistatic wristband or touching an earthed metal surface.
Safety instructions
Although our product complies with the requirements of the RoHS Directive (2011/65/EU) and does not contain any
hazardous substances in quantities exceeding the permitted limits, residues may still be present. Observe the following
safety instructions to avoid chemical hazards: Caution: Soldering can produce vapours that can be harmful to health. Note:
Use a soldering fume extractor or work in a well-ventilated room.
area. Wear a respirator if necessary. Caution: Some people may be sensitive to certain materials or chemicals contained in
the product. Note: If skin irritation or allergic reactions occur, discontinue use and consult a doctor if necessary. Caution:
Keep the product out of the reach of children and pets to avoid accidental contact and ingestion of small parts. Note: Store
the product in a secure, closed container when not in use. Caution: Avoid contact of the product with food and drink. Note:
Do not store or use the product near food to prevent contamination. Although our product fulfils the
To Next Page
Loading...