Why AZ Patio Heaters Outdoor Fireplace burner won't light?
Your AZ Patio Heaters Outdoor Fireplace burner might not light because there's a blockage in the orifice. Clear the blockage to resolve this. Alternatively, the control knob might not be in the ON position; make sure to turn it to ON.
What to do if AZ Patio Heaters F-1350-FPT burner flame is low?
If the burner flame on your AZ Patio Heaters Outdoor Fireplace is low, it could be due to several reasons. First, the gas pressure might be low; turn the cylinder valve OFF and fill the cylinder. Second, if the outdoor temperature is less than 40ºF and the tank is less than 1/4 full, use a full cylinder. Finally, check the burner and orifices for any blockage.
How to fix carbon build-up and thick black smoke from AZ Patio Heaters F-1350-FPT?
If you're experiencing carbon build-up and thick black smoke from your AZ Patio Heaters Outdoor Fireplace, it's likely due to dirt or film on the burner. Clean the burner to resolve this. Another potential cause is a blockage in the burner. Remove the blockage and clean the burner both inside and outside.
General| Product Name | AZ Patio Heaters F-1350-FPT |
|---|---|
| Category | Outdoor Fireplace |
| Fuel Type | Propane |
| Heat Output | 40, 000 BTU |
| Width | 32 inches |
| Depth | 32 inches |
| Material | Steel |
| Color | Black |
| Ignition Type | Piezo Ignition |
| Warranty | 1 Year Limited Warranty |
Discusses fire and explosion risks from combustibles and vapors.
Details risks of carbon monoxide poisoning and ventilation needs.
Important warnings about outdoor use, handling propane, and installation.
Chemical warnings for California residents regarding combustion by-products.
Warnings about hot surfaces and keeping children away.
Cautions regarding storing items under the fire pit and service procedures.
Steps to perform before turning on the fire pit for safe operation.
Steps to follow after turning off the fire pit to ensure safety.
Guidance on checking parts and tools before starting assembly.
Instructions for connecting the main side panels of the fire pit.
Steps to attach the gas tank bracket and support to the unit.
Procedure for mounting the burner bracket onto the assembled panels.
Steps for attaching the connecting rod to the burner assembly.
Instructions for securing the table top to the burner bracket.
Guidance on placing glass beads and the burner cover.
Instructions for connecting the propane hose and regulator to the cylinder.
Details on propane cylinder requirements and safety.
Procedure for performing a leak test on gas connections.
Checks and preparations before activating the gas supply.
Inspection and readiness checks before igniting the fire pit.
Step-by-step guide for igniting the fire pit.
Information on normal flame appearance and troubleshooting.
Procedure for re-lighting the fire pit if it goes out.
Instructions for safely turning off the fire pit.
Guidance on cleaning the unit's exterior.
Ensuring unobstructed airflow for proper operation and safety.
Indicators of potential issues like gas odor or uneven flame.
Instructions for storing the fire pit between uses and during inactivity.
Guidelines for professional repair of gas passages and components.
To Next Page
