Need help?Do you have a question about the azcue AN Series and is the answer not in the manual?
General| Brand | azcue |
|---|---|
| Model | AN Series |
| Category | Water Pump |
| Language | English |
Specific terms and conditions governing the pump warranty coverage.
Description of the AN series centrifugal pumps.
Description of the MN series centrifugal pumps.
Description of the BOB series centrifugal pumps.
Description of the CP series centrifugal pumps.
Description of AN-EP and AU-EP self-priming pump series.
Specifies the maximum allowable fluid temperature for pump operation.
Indicates the direction of shaft rotation when viewed from the motor.
Details the types and sizes of connection flanges used.
Lists the materials used for pump components.
Procedures for safe and proper handling and transportation of the pump.
Guidance on the use and removal of protective covers during installation.
Guidelines for connecting suction and discharge piping to the pump.
Instructions for securely anchoring the pump unit to its base plate.
Information on maintaining and checking the flexible coupling for alignment.
Specific starting procedures for AN-EP and AU-EP self-priming pump models.
Tasks and checks to perform while the pump is running.
Steps for disassembling AN, MN, and CP series pumps.
Steps for disassembling BOB series pumps.
General procedures for reassembling pump components.
Steps for disassembling the self-priming pump unit.
Steps for reassembling the self-priming pump unit.
Instructions for short-term storage of pumps.
Instructions for long-term storage of pumps.
Procedures for storing pumps after they have been put into service.
Troubleshooting guide listing pump problems and their corrective actions.
To Next Page