Azden SGM-2X - User Manual

SGM-2X
INSTRUCTIONS
DUAL-BARREL
PROFESSIONAL SHOTGUN MICROPHONE
© 2007 Azden Corporation
P1040-01 012-34136-01B
Printed in Japan
Customers in the Asian and Oceania markets contact:
Azden Corp., 1-12-17 Kamirenjaku Mitaka-shi, Tokyo, 181-8533 Japan
voice - 81-1-422-55-5115(Japan) • fax - 81-1-422-55-0131(Japan)
email - sales@azden.co.jp
Azden Corporation warrants, to the first purchaser, that the Azden brand product
purchased is free from defects in material and workmanship. Azden's sole obligation
under this warranty shall be to provide, without charge, repair or replacement
(at Azden's option), within two years from the date of purchase. A dated receipt acts
to establish the date of purchase.
This warranty is the sole and exclusive express warranty given with respect to the
product and all other express warranties are herby excluded. Neither AZDEN, nor
the dealer who sells this product, is responsible for indirect, incidental or consequential
damages. Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation may not apply to you.
This warranty does not extend to any defect, malfunction or failure caused by misuse,
abuse, accident, faulty hookup, unauthorized modification or defective associated
equipment for which it is not intended. Please read your owner's manual carefully.
This warranty gives you specific legal rights. You may also have other rights which
vary from state to state.
To register this product, go to www.azdencorp.com/warranty "for North/South
America and EU customers.
Asia/Oceania customers contact with Azden distributors listed on www.azden.co.jp/global.html
TWO-YEAR WARRANTY
Customers in the North/South America and Europian markets contact:
Azden Corp., 200 Valley Road, Suite 101, Mt. Arlington, NJ 07856
voice - 973-810-3070 • fax - 973-810-3076 • email - azdenus@azdencorp.com

Summary

Two-Year Product Warranty

SGM-2 X Microphone Instructions

Battery Installation and Use

Instructions for installing and managing the 'AAA' battery power source for the SGM-2X.

Microphone Barrel Configurations

Details on using the short and long barrels to change pickup patterns and optimize sound capture.

Shock-Mount Holder Attachment

Guidance on attaching and securing the SGM-2X using the provided shock-mount holder.

Power Switch Operation

Explanation of the three-position power switch functions: OFF, ON, and LOW CUT.

Microphone Output Connection

Information on the microphone's balanced XLR output and compatible input requirements.

Wireless Operation Options

Details on converting the SGM-2X into a wireless microphone with Azden transmitters.

Technical Specifications

Technical specifications of the SGM-2X, including frequency response, sensitivity, and dimensions.

Azden SGM-2X Specifications

General

Type	Shotgun
Polar Pattern	Supercardioid
Max SPL	130 dB
Output Impedance	200 Ohms
Signal to Noise Ratio	78 dB
Output Connector	XLR
Frequency Response	40 Hz - 20 kHz
Length	9.5 inches
Dimensions	241 mm