Note: Your processor will not work until the lid, blender, or security lid
is fully seated and locked to provide your safety. The device will only
operate by inserting the blender container or the food container into
the motor slot and the lid towards the chamber.
USE OF THE FOOD PROCESSOR
•Beforeyoustartusingyour
device, please read the " Cleaning
and Care" section and carefully
wash the parts that can be washed
with warm soapy water. Never
immerse the main body in water,
wipe it off with a slightly damp
cloth.
•Filltheblenderwith0.5liters
of warm water to and run for 5
seconds at maximum speed to clean the blender jug.
OPERATION
•Placetheprocesscontaineronthemotorunitandturnitclockwiseto
secure it .
•Toruntheblender;placetheblendercontaineroverthemotorbody.
Turn clockwise to lock. There are four different positions to secure the
blender to the motor body. Do not apply too much force to the blender
jar handle .
SPEED BUTTON: To start your device, you only
need to bring the on / off switch to position 1.
You can adjust the speed of your device by
turning the knob clockwise. With this function,
you can increase or decrease the speed of the
appliance according to the food grade you place.
PULSE: When you set the speed setting knob
to Pulse "P" position, your device will operate at instant, pulse and max
speed. When the pulse button is operated intermittently, the food to be
processed will be better chopped.
WARNING: Your processor will not work unless you place the process
container and cover exactly in place and lock it. Carefully read and
follow the written operating instructions.
WARNING: Before you remove your accessories, always turn the
power switch of your device to "0" (OFF) and unplug before moving
the accessory to and from the moving parts during use and before
cleaning your device .
•Avoidactionsthatmayharmordamagethecordorplugofyour
appliance. Do not carry your appliance by holding from the cord. To
unplug the tea maker, hold the plug and NEVER pull by the cord.
•Donotoperateyourdevicewithdamagedcables,plugsand
accessories,afteranyfailureorwhenthereisamalfunction.Inthiscase,
please contact your nearest Arzum Authorized Service Center . The plug
and cable must be replaced by an authorized service agent.
•Neveruseapartnotmanufacturedorrecommendedbythe
manufacturer as they may cause fire, electrical shock or injury.
•Operateyourdeviceonalevelsurface.
•Beforeoperatingyourdevice,makesurethattheaccessoriesarefirmly
in place and do not operate any accessories without any ingredients.
•Donotfillyourdevice'sprocessingcontainerandblenderjugoverthe
specified amounts.
•Beforestarting,makesurethatthecontainercoverisfullyseatedand
locked.
•Donotdisengagethelockingmechanismusingothertools.
•Payattentiontochopping,mixing,gratingandslicingbladeswhen
using or cleaning your robot. Blades can cause serious injuries as they
are very sharp. When using the blades, be careful to store the blades
in the correct places when cleaning to store them in the case or in the
protective case when not in use.
•Whileoperatingtheblenderandgrindersectionsofyourdevice;keep
your hands, your clothes, your hair, spatulas and other accessories
away from moving parts to reduce the risk of injury and damage to your
processor. Never open the large cover while using the blender.
•Whenusinggraters,pushthematerialtobeshavedusingthepresser,
NEVER do this with your hand or other tool.
•Makesurethatthemotorstopswellbeforeremovinganyaccessories
from your device.
•Toreducetheriskofinjury,donottrytoinsertthebladeorcarrierdisc
without fitting it well.
•Useyourdeviceasrecommendedandfitforthepurpose.
EN