3- WHISKER CREAM ATTACHMENT
You can use the whisker cream attachment to
prepare cream, eggs, egg whites, ready pudding,
mayonnaise and
soft cake mixture.
•Placetheattachmentslotinthemotorhousing
•Placethewhiskercreamattachmentintheslot
•Placematerialsinthecontainer.
•Placethecaponthecontainer.Turnthecapclockwisetolock.
•Placethepresserinthefeedtube.
•Selecttheappropriatespeed.
•Whentheprocessisnished,movethespeeddialto"0"positionand
pull the plug of the device out of the socket.
Note: Do not use whisker cream attachment when preparing cake mix
containing margarine and fat or when kneading dough. Use kneading
attachment for these operations.
Make sure that the container and whisker cream attachment are dry
and oil-free while whisking egg whites. Egg whites should be at room
temperature. It is recommended that you run at high speed while
preparing mayonnaise and cream.
2- DOUGH KNEADING
You can use kneading accessory to knead yeast
dough such as bread and pizza dough.
•Inserttheattachmentslotintothecontainer.
•Placethekneadingandmixingbladeintheslot.
•Placematerialsinthecontainer.
•Placethecaponthecontainer.Turnthecapclockwisetolock.
•Placethepresserinthefeedtube.
•Selecttheappropriatespeed.
•Whentheprocessisnished,movethespeeddialto"0"positionand
pull the plug of the device out of the socket.
Cream 125 - 350 ml 1 15-20 seconds
Egg 4 pcs 1 2,5 Minutes
Material Ideal Operation PositionMax. Quantity Operation time
WARNINGS:
1- The maximum mixing capacity of the processing container is 1,2 lt.
2- The maximum capacity of the blender is 1 lt.
3- Do not operate your device continuously for more than 20 seconds.
If necessary, you can operate it after a one-minute break.
4- Do not use your device with excessive load and capacity.
1- CHOPPING AND MIXING
•Placetheprocesscontaineronthemotor
unit and turn it clockwise to secure it .
•Installanyaccessories(bladeunit,
kneading accessory, beater whisk, or
preferred blade) into the attachment
housing in the processing container.
•Whenusingthebladeunitorthe
kneading attachment, put the materials to
be processed in the container.
•Placethecaponthecontainer.Turnthe
coverclockwisetolockit;a'click'willbe
heard.
•Whenusingthecarrierdiscsandblades,
place the materials in the feed tube and
push down with the presser.
•Selecttheappropriatespeedsetting.
•Whenyouarenished,bringthespeed
dial to the "0" position to bring the device to
the off position.
WARNING: Keep the metal blade on the
plastic carrier when you are not using it,
and never touch the blade ends. When the
process container is empty, always first
remove the blade, wash it, and always
store it in the plastic safety cover or in the
chamber after it is installed.
Meat 300 gr P/2 10 seconds
Onion 700 gr P 10 seconds
Nuts 250 gr 2 40 seconds
Cheese 150 gr 2 50 seconds
Bread 100 gr 1 40 seconds
Parsley 100 gr P 10 seconds
Chocolate 250 gr 2 40 seconds
Material Ideal Operation PositionMax. Quantity Operation time