Easy Start Guide
HL113EW | HomeplugAV 200 Mbps with WiFi
C Setup for New Network Connection
- HL113EW - Easy Start Guide
- Ethernet Cable - Warranty Card
- Resource CD
Simple Connect Button
B Device Overview
A Package Contents
In Room A, plug in your HomePlug AV device into the
power outlet and connect it to your router’s ethernet
port using an ethernet cable.
Make sure that your router’s internet connection is
up to allow you to access the internet.
1.
WPS Button /
Wireless LED
Power LED
Power Line
Activity LED
Ethernet LED
Ethernet Ports
D Conguring Wireless Settings (Optional)
On your computer, turn o Wireless Adapter (if
applicable).
Open and Launch a web browser. Type in 10.0.10.254
on the web browser’s url link then hit enter key.
Ensure to follow the connection set up below.
Connect an ethernet cable from the PC to any of the
Ethernet Ports of the HL113EW.
1.
2.
3.
Conrm that the connection was established on
both Home Plug AVs. Successful connection is
indicated by Green light on both Power and Power
Line Activity LEDs. Your Homeplug AV is now ready
for use and may now access the internet.
In Room B, plug in your HL113EW device into the
power outlet. You may connect any device (e.g.
computer / notebook) to its ethernet port; you may
also connect any of your wireless devices via WiFi
(SSID and Password is printed at the label sticker
located at the top surface of your HL113EW).
2.
3.
Enter ‘admin’ for Username and ‘admin’ for
Password.
Select the Wireless tab to modify the wireless
settings.
After changing the preferred settings, click Apply to
save.
4.
5.
6.
To Next Page
Need help?
General
