Aztech HL129EP Easy Start Guide

MODEL
HL129EP
The following items below are included in your HL129EP package.
Package Contents
HomePlug AV2 devices are preconfigured with a common Private Network Name. Adding new HomePlug AV2 devices to an existing
network with the default Private Network Name is as easy as plugging the device into the power outlet. If you wish to have a unique
Private Network Name, simply follow the instructions below. This Easy Start Guide, the User Manual, and the HomePlug AV Utility
software is included in the Resource CD and is also downloadable on our Aztech Support Website (www.aztech.com/support).
Device Overview
STEP 1 :
In Room A, plug in your HomePlug AV2 device into the power outlet
and connect it to the modem router using an Ethernet cable.
NOTE: Ensure that your modem router’s internet connection is UP to
allow access to the internet.
STEP 2 :
In Room B plug in your other HomePlug AV/HomePlug AV2 device
into the power outlet and connect it to your computer’s Ethernet port
using an Ethernet cable.
Setting up your HomePlug AV Network
STEP 3 :
Confirm that a connection has established on both HomePlug AV/
HomePlug AV2 devices. All three LEDs (Power , Powerline , and
the corresponding Ethernet LED ) must be ON. Your Homeplug AV
Network is now ready to use and can now access Internet.
Resource CD Easy Start
Guide
Ethernet
Cable
A
C
HL129EP
DEVICES ARE PLUG
AND PLAY READY.
Powerline
Activity LED
Ethernet
Activity LED 1
Power LED
Simple
Connect
Button
Reset
Button
Ethernet
Port 1 & 2
Ethernet
Activity LED 2
NOTE : You may use this AC Pass-
through as an extra power outlet.
2
B
BOTTOM VIEW
** The HL129EP is
also available in a
DEU Plug variant.

Aztech HL129EP Specifications

General

Wireless Speed	Up to 300Mbps
Frequency Bands	2.4GHz
Security	WEP, WPA, WPA2, WPS
Ethernet Ports	4 x 10/100 Mbps
ADSL Standards	ITU-T G.992.1 (G.dmt), ITU-T G.992.2 (G.lite), ITU-T G.992.3 (ADSL2), ITU-T G.992.5 (ADSL2+)
Standards	IEEE 802.3, IEEE 802.3u
Ports	4 x RJ-45