Aztech HW550-3G Configuration Guide

P R O D U C T E N G I N E E R I N G A N D S U P P O R T
S i n g a p o r e
A Z T E C H T E C H N O L O G I E S P T E L T D
AZTECH HW550-3G
WIRELESS N 3G ROUTER
RECONFIGURING TO CONNECT TO THE INTERNET
1. Make sure that the HW550-3G is switched off
2. Using an Ethernet cable connect the HW550-3G’s WAN port to the wall socket
3. Connect the power adapter to the HW550-3G then turn it on
4. At the back of your computer look for the Ethernet port, connect an Ethernet cable to your
computer’s Ethernet port then connect the other end of the cable to the HW550-3G’s LAN port
5. On your computer open your Internet browser then type 192.168.2.1
6. An authentication page will pop-up, type admin for the username and admin for the password
then click OK
7. This will open the HW550-3G’s Web User Interface, Go to Wizard to setup your router
8. Under Wizard Page click Next to proceed with the setup

Aztech HW550-3G Specifications

General

Brand	Aztech
Model	HW550-3G
Category	Wireless Router
Language	English