Need help?Do you have a question about the Aztech WL830RT4 and is the answer not in the manual?
General| Wireless Standards | IEEE 802.11b/g/n |
|---|---|
| Frequency Band | 2.4 GHz |
| Maximum Wireless Speed | 300 Mbps |
| Ports | 4 x 10/100 Mbps LAN, 1 x 10/100 Mbps WAN |
| Security | WPA, WPA2 |
| Firewall | SPI firewall |
| Features | Guest Network, Parental Control |
| Power Supply | 5V DC, 1A |
| Antennas | 2 x 5dBi fixed antennas |
Details the technical specifications of the WL830RT4 Wireless G Broadband Router.
Lists the minimum system requirements for installing and using the router.
Guides through the physical connection of the router and its components.
Outlines the steps to establish an internet connection using the router's Web Manager.
Explains how to log in and access the router's web-based management interface.
Guides users through a simplified setup process for basic router configuration.
Covers configuration of LAN, WAN, and MAC Clone settings for network connectivity.
Covers wireless network settings, security, and statistics.
Details how to configure IP parameters for the local area network.
Explains the various WAN connection types and their configurations.
Provides options for SSID, region, channel, mode, and radio settings.
Details DHCP server settings, client lists, and IP address reservation.
Covers port forwarding, DMZ, and UPnP for enabling services and applications.
Provides firewall, IP filtering, domain filtering, and MAC filtering configurations.
Configures the router's DHCP server, IP address pool, and lease times.
Guides on setting up virtual servers to expose LAN services to the internet.
Enables and configures the router's firewall for network protection.
Allows controlling internet access based on specific IP addresses.
Provides protection against DoS attacks like SYN Flood, UDP Flood, and ICMP Flood.
Provides access to tools for managing router time, firmware, and settings.
Explains how to check for and upgrade the router's firmware.
Describes how to restore the router to its original factory default settings.
Guides on changing the default user name and password for the Web Manager.
To Next Page
