User Manual
Enable MAC Filtering set MAC Address Filtering is enabled or disabled. You can
select the default filtering rules of MAC Address Filtering, either Allow or Deny
accessing the router.
IP Address Filtering
The IP address Filtering feature allows you to control Internet Access by specific users on
your LAN based on their IP addresses. The IP address filtering is set on this page:
IP Address Filtering
To disable the IP Address Filtering feature, keep the default setting, Disabled. To set up
an IP Address Filtering entry, click Enable Firewall and Enable IP Address Filtering on the
Firewall page, and click Add New. The page Add or Modify an IP Address Filtering entry
will appear:
Page 68 of 102
To Next Page
Loading...
