User Manual
Security
There are six submenus under the Security menu: Firewall, IP Address Filtering, Domain
Filtering, MAC Filtering, Remote Management and Advanced Security. Click any of them,
and you will be able to configure the corresponding function.
Firewall
Using the Firewall page you can turn the general firewall switch on or off. The default
setting for the switch is off. If the general firewall switch is off, even if IP Address
Filtering, DNS Filtering and MAC Filtering are enabled, their settings are ineffective.
Firewall
Enable Firewall the general firewall switch is on or off.
Enable IP Address Filtering set IP Address Filtering is enabled or disabled. There
are two default filtering rules of IP Address Filtering, either Allow or Deny passing
through the router.
Enable Domain Filtering set Domain Filtering is enabled or disabled.
Page 67 of 102
To Next Page
Loading...
Need help?
General
