User Manual
Remote Management
Remote Management allows you to manage your Router from a remote location, via the
Internet.
Remote Management
Web Management Port Web browser access normally uses the standard HTTP
service port 80. This router’s default remote management web port number is 80.
For greater security, you can change the remote management web interface to a
custom port by entering that number in this box provided. Choose a number
between 1024 and 65534, but do not use the number of any common service
port.
Remote Management IP Address This is the current address you will use when
accessing your router from the Internet. The default IP Address is 0.0.0.0. It means
this function is disabled. To enable this function, change the default IP Address to
another IP Address as desired. To access the router, you will type your router's
WAN IP Address into your browser's Address (in IE) or Location (in Navigator) box,
followed by a colon and the custom port number. For example, if your Router's
WAN address is 202.96.12.8 and you use port number 8080, enter in your
browser: http://202.96.12.8:8080. You will be asked for password. After
successfully entering the password, you will be able to access the router's web-
based utility.
Note: Be sure to change the router's default password to a very secure password.
Page 75 of 102
To Next Page
Loading...
