User Manual
2. Type the description of the PC in the Description field. Fox example: John’s PC.
3. Status - Select Enabled or Disabled for this entry on the Status pull-down list.
4. Click Save.
5. When finished, click Return to return to the MAC Address Filtering page.
To modify or delete an existing entry:
1. Click the Modify in the entry you want to modify. If you want to delete the entry,
click the Delete.
2. Modify the information.
3. Click Save.
Click Enable All to make all entries enabled.
Click Disabled All to make all entries disabled.
Click Delete All to delete all entries
Click Next to go to the next page or click Previous to return to the previous page.
Fox example: If you want to block the PC with MAC addresses 00-0A-EB-00-07-BE and 00-
0A-EB-00-07-5F to access the Internet, first, enable the Firewall and MAC Address
Filtering on the Firewall page, then, you should specify the Default MAC Address Filtering
Rule Deny these PCs with effective rules to access the Internet on the Firewall page and
the following MAC address filtering list.
Page 74 of 102