User Manual
UPnP (Universal Plug and Play)
The Universal Plug and Play (UPnP) feature allows the devices, such as Internet
computers, to access the local host resources or devices as needed. UPnP devices can be
automatically discovered by the UPnP service application on the LAN. You can configure
UPnP on this page:
UPnP
Current UPnP Status UPnP can be enabled or disabled by selecting Enable or
Disable. As allowing this may present a risk to security, this feature is disabled by
default.
Current UPnP Settings List This table displays the current UPnP information.
App Description – The description provided by the application in the UPnP
request
External Port - External port, which the router opened for the application.
Protocol - Which type of protocol is opened.
Internal Port - Internal port, which the router opened for local host.
IP Address - The UPnP device that is currently accessing the router.
Status - Enabled means that port is still active, otherwise, the port is inactive.
Click Refresh to update the Current UPnP Settings List.
Page 66 of 102
To Next Page
Loading...
Need help?
General
