User Manual
MAC Filtering
The Wireless MAC Filtering for wireless networks are set on this page:
Wireless MAC Address Filtering
The Wireless MAC Address Filtering feature allows you to control wireless stations
accessing the router, which depend on the station's MAC addresses.
MAC Address The wireless station's MAC address that you want to access.
Status The status of this entry either Enabled or Disabled.
Privilege Select the privileges for this entry. You may select one of the following
Allow / Deny / 64-bit / 128-bit / 152-bit.
Description A simple description of the wireless station.
WEP Key Specify a unique WEP key (in Hexadecimal format) to access the router.
To set up an entry, follow these instructions:
First, you must decide whether the unspecified wireless stations can access the router or
not. If you desire that the unspecified wireless stations can access the router, please
select Allow the stations not specified by any enabled entries in the list to access,
otherwise, select to Deny the stations not specified by any enabled entries in the list to
access.
Page 50 of 102
To Next Page
Loading...
Need help?
General
