User Manual
BigPond Cable
BigPond Cable
If you choose BigPond Cable, you should enter the following parameters:
User Name/Password Enter the User Name and Password provided by your ISP.
These fields are case-sensitive.
Auth Server Enter the authenticating server IP address or host name.
Auth Domain Type in the domain suffix server name based on your location. For
example, NSW / ACT - nsw.bigpond.net.au VIC / TAS / WA / SA / NT -
vic.bigpond.net.au QLD - qld.bigpond.net.au
Connect on Demand You can configure the router to disconnect from your Internet
connection after a specified period of inactivity (Max Idle Time). If your Internet
connection has been terminated due to inactivity, Connect on Demand enables
Page 38 of 102
To Next Page
Loading...
