Please retain this easY start GUiDe for fUtUre Use.
VC3000
Smart Robotic Vacuum Cleaner
EASY START GUIDE
REMINDERS FOR FIRST USE
Before using, check if the power voltage of your Aztech VC3000 corresponds
correctly to your home’s power supply.
Position the Aztech VC3000 on a smooth, heat resistant, and stable ground.
Ensure to correctly insert the required batteries of the Aztech VC3000, its
virtual wall (2 AA) and remote control (2 AAA), while observing the correct
polarity of the batteries to be inserted.
In using the remote control, ensure that you are at least 4 meters away from
the vacuum cleaner and that the remote control is properly aimed at the
vacuum cleaner’s sensor.
Ensure that there are no obstacles and/or uneven surfaces 2 meters in front
and 0.5 meters on both sides of the Docking Station.
The Virtual Wall will allow you to limit the cleaning areas of your Aztech
VC3000. Always ensure that its front and sides are free from any kind of
blockage and/or obstructions that may hinder its functionality.
Should damages be found in the appliance, do not use the appliance and
immediately bring it to the Aztech Service Center.
1.
2.
3.
4.
5.
6.
7.
PACKAGE CONTENTS
VC3000 Docking Station Power Adapter Virtual Wall
Trailing Bar Cleaning Brush (2) Side Brush
Suction InletHEPA Filter (2) Mops
Remote Control
To Next Page
Need help?
General
